FERGUSON ARIVA Nombre de usuario. Importante: Firmware Patch Ariva 100/200 2.05B7. Ariva 150 bloqueado problema ASH.

Welcome to Boards.ie; here are some tips and tricks to help you get started. Boards.ie is a discussion board with a wide range of forums, including - but not limited to -,,,,,,,,,, and everything in between. There's also, one of the busier forums on Boards.ie, which takes a more lighthearted approach to many topics. The drop down menu at the top will help you find a topic of interest or you can If you have any questions about the site, head over to the. You can also Private Message one of our Community Managers. Remember, you may not agree with everything you read (and people may not agree with your viewpoint), but you can talk it out as long as you attack the post and not the poster.

So, what are you waiting for? Get out there and share your passion with others! Useful Links: • • • •. Hi, I have a ferguson ariva 120 combo, i tried to update it with firmware from ferguson website, but i used wrong firmware, now my box is dead, nothing being displayed on the screen. I tried to use eprom upgrade software and later ferguson ariva 120 combo software from ferguson website, i run the software and then enter the file and select next, i then turn receiver off, but it reports stb memory error must of tried this a 1000 times, I have tried everything from all the forums and every time it reports this error. Tried new and old firmware, no lights on the box at all but com port connects to report memory error.

Worst case scenario can this receiver be jtag had to do this before absolute pain in the next but other than that i fear receiver is dead. Bought from satsklep. Any help Kind Regards Fergald.

Start with the receiver off then turn it on when you start the software using the switch on the back Yes I noticed that too. Wrong sequence. You dont turn the box off ever during a flash. It reboots itself from memory. You dont have to JTAG these, they have a protection device built in - Serial Boot rom loader onboard. Unless it is one of the dodgy batch that Satsklep and Satworld had around Christmas - if thats the case then return it. I wouldnt be admitting to flashing the wrong firmware to it though.

Uncheck bootloader option when flashing. Use the ALI tool and software flash. This has worked for many that have PM'd me. Too much flashing of boxes going on.

Metodika orehovoj domiki obrabotka rezuljtatov. Hi, I had the same problem with a Ferguson Ariva 120HD box, I turned it on recently and 'ASH' was on the led display - nothing on screen. I pressed a few buttons, tried the remote and nothing happned.

Turned it on and off from the back and then there were random segements of the led display on, then eventually the display went totally dead. I used a null modem cable and the 'STB EPROM Upgrade 2.0.0c' program to attempt to re-flash the boot-loader and firmware but it failed numerous times. Never got past the initialisation and to the point of downloading to the box.

I got a 'STB memory error' or something very similar. I must have tried about 30-50 times before it eventuall progressed a bit further and downloaded the firmware to the box.

Then the next failure, at the 'Burning Image' stage. It either failed straight away with a 'flashing is failed' error or the progress bar would move pretty slowly to somewhere between 15-30% before failing. Eventually it flashed sucessfully (after another 20-30 tries) and the box restarted. 'On' appeared on the LED display. But after another few seconds the dreaded 'ASH' appeared again. Nearly threw it out the window. After another 10-15 attempts at flashing I has another sucessful flash and it seemed to be working, channel scans etc seem to be working fine now and 24 hrs later the box is still working.

I suspect the my box may have a dodgy EEPROM or something, I'll keep an eye on it and let you know how it goes over the next few days/weeks. So my advice for anyone with the 'ASH' problem or a completly dead box is to use an RS232 Flash utility, latest official f/w (2.17B3) and try & try (& try x50) again until the flash works!

Very happy with the features and functionality of the box otherwise. I had been using the patched f/w but flashed the original f/w.